sailing on anchor
To anchor a boat, start by approaching the spot you want to anchor at from downwind and stopping once you’re directly over it. next, slowly lower the anchor over the front of the boat, stopping after you’ve let out about 1/3 of the rope. then, allow the line to straighten out before letting out another 1/3.. Few sailing experiences are as scary as waking in the middle of the night with the wind blowing hard and your boat dragging anchor toward rocks, the shore, or another boat. and one of the most irritating things for most cruising sailors is finding another boat dragging down upon them or getting tangled in their own anchor line.. This is the big maersk offshore support vessel, sitting a bit closer to shore of cott beach. a naval artichoke mate of mine that works in the heavy marine industry was out sailing near her on saturday. he reckons before the storm they were sitting on dp (not anchor) - this incurs a lower harbour charge. cheeky buggers!!. 
sailing on anchor The anchor riding sail is a small mizzen that is rigged on the backstay. with this sail rigged, when the wind blows the sail catches the air and acts as resistance to keep the boat head to wind. the key to an anchor riding sail solving your swinging problem is proper rigging. first, the sail should be hoisted on the backstay.. As the boat pulls on the anchor rode, the anchor digs in deeper, creating additional resistance. in rocky bottoms, anchors can't dig in, but rather snag on protrusions and hold precariously. setting. to ensure that an anchor "sets" well, apply tension to the rode so the anchor penetrates the bottom. do this by making fast the line and applying.
